Aerospace & Defense, Industry Focus Areas, Process, R & D
March 13, 2020
Via: Manufacturing Tomorrow3D printing of parts is a new technology that has come up with the potential to transform the way enterprises build new products, including parts for defense and aerospace. This new manufacturing process is known as 3D printing or additive […]
Aerospace & Defense, Industry Focus Areas
December 9, 2019
Via: Industry WeekShares of Airbus SE handily pulled ahead of rival Boeing Co. this year after a pair of fatal 737 Max plane crashes led to the grounding of the U.S. model’s entire fleet. Airbus is poised to finish the year ahead […]
Aerospace & Defense, Industry Focus Areas
November 14, 2019
Via: Industry WeekScore one for the humans. After four years of trial and error, Boeing Co. is dumping one of its most ambitious forays into automation: the robots that build two main fuselage sections for its 777 jetliners and an upgraded version […]
Aerospace & Defense, Industry Focus Areas, Motorized Vehicle
October 11, 2019
Via: Automotive NewsPorsche and U.S. planemaker Boeing are working to develop a concept electric flying vehicle capable of transporting people in urban settings. Porsche and other automakers are aiming to build flying cars that can be used as taxis and for ride-sharing […]
Aerospace & Defense, Industry Focus Areas
July 25, 2019
Via: Industry WeekBoeing Co. warned it will consider slowing or even temporarily halting production of the 737 Max, the company’s most important jetliner, if a global flying ban drags on longer than anticipated. The planemaker’s best estimate is that it will submit […]
Aerospace & Defense, Industry Focus Areas
June 17, 2019
Via: Manufacturing GlobalToday, 17 June, saw the opening of the week-long International Paris Air Show. An important event for the aerospace and defence industry, the show is held at Le Bourget on the outskirts of Paris. As the BBC reports, almost 2,500 […]
Aerospace & Defense, Industry Focus Areas, Regulations
March 18, 2019
Via: Industry WeekFAA employees warned as early as seven years ago that Boeing Co. had too much sway over safety approvals of new aircraft, prompting an investigation by Department of Transportation auditors who confirmed the agency hadn’t done enough to “hold Boeing […]
Aerospace & Defense, Industry Focus Areas
March 12, 2019
Via: Industry WeekBoeing Co. is facing a growing crisis of confidence over its 737 Max jet, as airlines and regulators from Singapore to Australia move to ground or block the plane following two deadly crashes in five months. A day after U.S. […]
Aerospace & Defense, Industry Focus Areas
December 28, 2018
Via: Industry WeekWith just a few days left before the year is over, Airbus SE says it’s working flat out to reach a goal of delivering 800 jetliners during 2018. The Boeing Co. rival is maximizing efforts to meet its target, which […]
Aerospace & Defense, Industry Focus Areas
December 14, 2018
Via: ASD NewsBoeing [NYSE:BA] today delivered the 787th 787 Dreamliner to come off the production line, marking a special milestone for the super-efficient airplane family and the fastest-selling twin-aisle jet in history. Since its first delivery in September, 2011, the 787 family […]
Aerospace & Defense, Industry Focus Areas
November 15, 2018
Via: Manufacturing GlobalAmassing more than 10 research and development centres worldwide, the largest aerospace company in the world, Boeing, has been named the top global innovator amongst aerospace and defence companies worldwide. Following on from this, the company has recently been revealed […]
Aerospace & Defense, Design & Planning, Industry Focus Areas, Process
October 26, 2018
Via: Manufacturing GlobalThe new factory, based in Sheffield in the UK, is set to produce thousands of parts a month which will be shipped for assembly at Boeing’s Portland facility in Oregon in the US. Following the launch of the facility, it […]
Aerospace & Defense, Industry Focus Areas, Process, R & D
October 3, 2018
Via: Manufacturing GlobalAs part of Boeing’s Second Century Enterprise Systems (2CES) initiative to transform itself and the aerospace industry to help meet the challenges of the 21st century, it will allow the company to adapt to ever-changing requirements in real world applications […]
Aerospace & Defense, Industry Focus Areas
September 28, 2018
Via: Manufacturing GlobalThe partnership will see the Air Force purchase 351 jets with full operational capability by 2034 in a move which enables the service to modernize its fleet of aircraft. Håkan Buskhe, president and CEO of Saab, said: “This selection allows […]
Aerospace & Defense, Industry Focus Areas
August 9, 2018
Via: Industry WeekBoeing Co. is working through cascading supplier problems that will hamper third-quarter deliveries of its 737 jetliner, the planemaker’s largest source of profit. Hiccups at the makers of fuselages and engines, combined with record 737 output, have contributed to a […]
Aerospace & Defense, Industry Focus Areas, Logistics, Process
July 17, 2018
Via: ASD NewsBoeing [NYSE: BA] lifted its long-term forecast for commercial airplanes as rising passenger traffic and upcoming airplane retirements drive the need for 42,730 new jets – valued at $6.3 trillion – over the next 20 years. The global airplane fleet […]
Aerospace & Defense, Industry Focus Areas
July 16, 2018
Via: ASD NewsBoeing [NYSE: BA] and Jackson Square Aviation (JSA) announced the leasing company has ordered 30 737 MAX airplanes in its first direct purchase from a jet maker, reflecting the evolution of the airplane lessor’s business and its confidence in the […]
Aerospace & Defense, Industry Focus Areas
July 6, 2018
Via: Manufacturing GlobalThe US-based airline manufacturer, Boeing, has made a deal with the Brazilian aerospace company, Embraer to form a joint venture. The proposed agreement will see Boeing take control of Embraer’s commercial jet business, expanding the US firm’s stake in the […]
Aerospace & Defense, Industry Focus Areas, Process, R & D
May 18, 2018
Via: Manufacturing GlobalBoeing will use Assembrix’s cloud-based software to secure intellectual property (IP) shared with vendors. The IP will be protected during both design and manufacturing, as Boeing aims to accelerate its 3D printing operations. “Boeing seeks suppliers globally who meet stringent […]
May 9, 2018
Via: Industry WeekUS President Donald Trump’s decision to withdraw from the Iran nuclear pact threatens new business for several big companies, including Boeing, Airbus and General Electric. The two aerospace giants were among the companies to receive US Treasury licenses to begin […]